Our vent-mounted gauge pods are perfect for fitting any 52mm or 45mm gauges directly to where your OEM defroster vent is without having to drill any holes in your dashboard or your A pillar! These mounts were created by using a 3D scan of the original dashboard defroster vent, then modeled to accept our 52mm or 45mm removable gauge pods to ensure a direct fit each time. Our pods and mounts are 3D printed using a high quality Nylon-like resin, which is then sanded and painted to provide a near-OEM look.
Dimensions:
Inner Diameter: 52mm or 45mm
Inner Depth: 66mm or 76mm
Current Lead Time: 4 Business Days*
*Please note that these typically have a 2 day lead time as they are made in small batches, then sanded and painted with a 2 day curing time to ensure a strong paint bond.
FAQ:
Q: How do I install this?
A: These are easily installed by removing your OEM dashboard vent. Using trim removal tools are recommended. Once the vent is removed, simply pop the new mount in, then install your gauge with your gauge pod.
Q: Will my gauge fit?
A: If your gauge is a standard 52mm or 45mm diameter gauge, then yes! However, due to slight variances with each manufacturer, you may need to sand down the inside of the pod, or add a non-permanent adhesive such as a piece of electrical tape if your particular gauge fits loosely.
Other Information:
Although 3D printing isn't a perfect process, we try our best to ensure that each gauge pod and vent mount are made to the highest quality possible. That being said, you may notice that there are layer lines visible through the painted part. The opening for the gauge pod at the bottom of the pod will also not be perfectly rectangular inside due to the support material that's required when printing these. There may also be left over dimples on parts of the underside of the gauge pod mount and the pod itself. Also, when removing and re-installing the pods from the mount, you may notice that the paint from the gauge pod to the mount may wear down after repeated removals and installations.
Gauge is not included.
The build quality and surface finish are really nice, however the tolerances are TOO tight. Fitting a gauge into the pod is very difficult, but possible. Howver fitting the pod into the vent, the fitment is very difficult.
On the initial try, the paint was coming off, however, I still couldn't get the pod to fit. I had to apply an uncomfortable amount of force to get them together, and a part of the vent mount snapped doing so. However it still works as a pod and fitment is still extremely secure even with the break.
I'm amazed at the quality of the 3d print. It honestly feels like it was injection molded. The part feel solid, the finish is nice, and I can't wait to get it in the car
Ive tried other set ups and types of gauge layouts for my SC M3 and the reason for that is I was never satisfied with the look and placement of the boost gauge. This design here is perfect for me. Keeps it OEM plus looking and clean. The pod fits perfectly in the cars slot and the material keeps the subtle looks of the oem vent. Great product here if your looking for place on your e9x to put a gauge.
BMW E9X Vent-Mounted Gauge Pods (2006 - 2011 BMW 3-Series)
Faces slightly too much towards the steering wheel. I’d make it more towards the driver
