This kit comes with the core essentials of what you'll need to actively cool your EKPM3 or EKPM2. You'll still need to figure out the wiring, but this kit is ideal for those who love a good DIY project, but don't like the hassle of sourcing all the parts required to make it work.
Please note that if you have an HW06 + (Slim EKPM3), you must choose the HW06 option, as the pre-HW06 housings will not fit. Also please note that the 60mm Noctua Fan option WILL NOT FIT stock location E9X, E8X, F3X etc... chassis behind the rear seat bolstering. This option is for those without a full interior or those willing to relocate their EKP module. HOWEVER the 40mm Noctua Fan option will fit in any stock location (excluding EKPM2)!
10% of all proceeds from pink housings sold will be donated towards Breast Cancer research.
Full Kit Contents:
1x EKPM3 / EKPM2 Cooler Housing
1x 12v 5015 Blower Fan or 1x 60mm Genuine Noctua Fan
1x 14x14x6mm Heatsink With Thermal Tape
1x 14x9x5mm Heatsink With Thermal Tape
1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit)
2x 9x9x5mm Heatsink With Thermal Tape (EKPM2 Kit)
2x M4x25mm Bolts
2x M4x20mm Bolts (HW06+ Only)
2x M4 Nylon Lock Nuts
Depending on heatsink availability, you may receive heatsinks that look different than what is pictured. However, we have tested both variants of heatsinks and have not noticed any measurable difference in heat dissipation from either style.
This product is not DOT approved and is not intended to be installed in a vehicle for street use and may void your vehicle's warranty.
This product does not guarantee that your EKP fuel pump control module will not fail over time nor will this product fix any existing errors you may have with your vehicle.
I thought this custom job was gonna be a pain I was wrong. I use a stock but newer fuel pump in a 328 but for some reason when I drive in sport mode on a hot day (over 80F) I get a fuel pump malfunction and and the engine would stall then it would start back up minutes later. Discovering this was a common problem for this car (e9x) I searched for solutions. First I looked for a 3d printer design that was open source but that wasn’t as easy as finding arc terminator on google in the same search. I haven’t connected the fan yet but I did add the heat sinks and fitted everything and it all fits behind the bolster perfectly. I couldnt ask for more. Perfect solution for ekp active cooling. I was sent the wrong module housing but I contacted support and Mike was light speed in sending me the correct part. The swag sticker was a nice touch, and honestly I think companies that don’t give a swag sticker aren’t as proud of the product or it just sucks. Thanks again. 10/10